![]() ![]() If you need several, call Dave at Manson Precision Reamers! ![]() If you need one barrel crowned, you might see your gunsmith. Finish by breaking the edge with a fine tooth file, and apply a little cold blue unless you have a stainless barrel.Įasy, professional results that are repeatable for about $125 using your own cordless screwdriver. You can get these from Midway or use a round head brass screw and a dab of rubbing compound like I did. Remember to lap the muzzle lands with a brass lapping ball and a little lapping compound. Don't rush it and let the tool do the work. It takes several cuts with the crowning tool, clearing away cuttings and adding cutting oil occaisionally. Then follow the instructions included in the package (the video is a big help here). Clean it up with a file if you have that barb sticking out at the end of the cut. It's adviseable to put it in a vise with a protective cardboard wrap so that you can cut it nice and straight. I cut my barrel with an ordinary hack-saw in about 3 minutes. I found a video of a fellow demonstrating a tool designed just for my sort of needs that would allow me to do a simple recrown at home with a minimum of tools. Knowing I would probably need to cut and recrown two or three times, I couldn't justify the expense of a gunsmith, several times over. I just need sense enough to stop when I see an improvment. I don't know how short, because I want to test the effects of cutting it down incrementally. I want to shorten the barrel on my Mini-14 because they are known to whip and reduce accuracy because they are so "pencil thin". I'm going to go all Billy Mays and give you a sales pitch here, but it's because I just used a product I found on the web and it is EVERYTHING the maker promised!
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |